Sony ZRD-1 Installation Manual page 46

(2) Hang the stay of the camera block on the hooks 1 of the adaptor.
. Be sure to hold the handles. Do not hold the camera.
. Gently put the lower portion of the camera block on the front of the display unit.
Camera
Handles
Camera block
(3) Hang the stays of the monitor block on the hooks 2 of the adaptor.
(4) Connect the USB cable of the monitor block to the camera block. Then, connect the power cord.
Hooks 2
Camera block
2-12 (E)
Stay
Camera
Camera
Adaptor
Stays
Power cord
Display unit
Camera
Hooks 1
Display unit
Monitor block
USB cable
Adaptor
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200