6-10. Reset of Display Controller Settings
The following settings are reset in all display controllers.
. [Input Signal] in Array menu
. [Picture] in Array menu
. [3D Settings] in Array menu (Except for S/N 2000001 to 2000100 of ZRCT-100 SY model)
. [System Setting] in Function menu
n
Reset the settings in power ON state.
1. Display the Main screen.
2. On the menu bar, click [System], and then click [Reset System]. (The screen varies depending on the
Display Control Software version.)
The following dialog is displayed.
3. Click [OK].
When the reset is completed, the following dialog is displayed.
4. Click [OK].
The display returns to the Main screen.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
6-33 (E)