3. Remove the PP band.
4. Remove the packing material (lower).
5. Open the protection sheet, then remove the eight protection tapes from the display unit.
6. Hold the handles of the display unit with both hands and take it out vertically.
n
Do not hit the cell (LED module board) on the front of the display unit with a hard object. Handle it
with extra care because the end face of the cell outer portion can be easily damaged. (Refer to step 1
in Section 2-4-3.)
Protection tapes
Display unit
Packing material (upper)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
Handle
Handle
Protection sheet
Packing material (lower)
Protection tapes
2-5 (E)