6-8. System Configuration Check
After all settings and adjustments are completed, check the configuration before clicking [Power ON] to
display the picture on the display unit.
n
Check the configuration after connecting all display controllers and display units. The display controllers
and display units are powered on and off automatically during the configuration check. The correct results
cannot be obtained if all display controllers and display units are not connected.
1. Display the Main screen.
2. On the menu bar, click [Installation], and then click [System Configuration Check]. (The screen
varies depending on the Display Control Software version.)
The following dialog is displayed.
3. Click [OK].
The following dialog is displayed.
6-30 (E)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200