Sony ZRD-1 Installation Manual page 125

[Color Space]
(*1)
[Native] :
[sRGB]:
(*3)
[AdobeRGB] :
(*2)(*3)
[DCI_P3] :
(*3)
[BT.2020] :
(*1): [Native (Default)] is displayed in the version earlier than 1.20.0, and [Native] is displayed in
the version 1.20.0 or later.
(*2): [DCI] is displayed in the version earlier than 1.20.0, and [DCI_P3] is displayed in the
version 1.20.0 or later.
(*3): The items can be selected in the following S/Ns.
. SY model: S/N 2000101 and later
. CN model: All S/Ns
. ZRCT-200
n
[AdobeRGB], [DCI], and [BT.2020] do not include the entirety of the color spaces defined by their
respective standards.
[Light Output] (Version 1.20.0 or later)
Change the output when you want to operate at low light output.
[Full]: 100%
[High]: 75%
[Medium]: 50%
[Low]: 25%
n
When the setting of [HDR] is other than "Off", the [Light Output] setting is disabled. (Version 1.20.00
through 1.21.01)
t
In the version earlier than 1.20.0, the item [Light Output] is displayed on the System Settings screen.
[Color Temperature Setting]
Select the color temperature in [Color Temperature].
When [D93], [D65], [D50], or [DCI] (ZRCT-200 only) is selected, proceed to step 6.
When [D93 Custom (Offset)], [D65 Custom (Offset)], [D50 Custom (Offset)], or [DCI Custom
(Offset)] (ZRCT-200 only) is selected, proceed to step 5.
5. Set the offset value.
The offset value can be set only when Custom (Offset) is selected in step 4. Change the setting using
the sliding lever and
[Default]: 0
6. Click [Close].
The Picture Settings screen is closed.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
Displays the picture with the display unit's color space of the three primary
color chromaticity points.
Displays the picture with the sRGB color space.
Displays the picture with the Adobe RGB color space.
Displays the picture with the DCI color space.
Displays the picture with the BT.2020 color space.
(_128 to +127). When you move the sliding lever, the value also changes.
6-29 (E)