6. Align the display unit in the Y direction.
(1) Insert the eccentric pins (long) into the two Y adjusting holes. Insert the hexagon wrench into the
eccentric pins (long).
. If you have difficulty in inserting the eccentric pins (long) into the Y adjusting holes, slightly
rotate the eccentric pins (long) to find the position into which they can be inserted.
(2) Loosen the eight screws by rotating them about one turn. (4 pcs x 2 portions).
2-24 (E)
Y direction
Y adjusting hole
Eccentric pin (long)
Hexagon wrench
Screws
Screws
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200