Sony ZRD-1 Installation Manual page 45

4. Attach the unit alignment tool.
(1) Mount the adaptor on the display unit, then manually secure it with the screws. (2 portions)
. Align the adaptor pins with the positioning holes of the display unit.
. When mounting the adaptor, be careful not to hit the adaptor against the upper edge portion of
the display unit. Otherwise, the cell on the front of the display unit may be damaged.
. Tighten the screws completely.
Positioning holes
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
Screws
Pin
Adaptor
Pin
Display unit
2-11 (E)