Sony ZRD-1 Installation Manual page 115

Display unit information
Screen example
1 [Display Unit Allocation]:
2 [Display Unit Connection]:
3 [Picture Allocation Number]: Allocation address of picture. The number located before the paren-
4 [Ambient Temperature]:
5 [Total Operating Time]:
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
1
2
3
4
5
Allocation address of display unit. Regarding the upper left corner of
display unit as "(1, 1)", it is displayed in "(column, row)".
Connection allocation address of display unit. It is displayed by
"(Controller number – Port number – Unit number)".
theses indicates the picture allocation number. "(xxx, yyy") is dis-
played by "(pixel coordinate in row, pixel coordinate in column)"
regarding the upper left corner of 3840 x 2160 video signal as "(0,
0)". The pixel coordinate indicates the picture starting point displayed
in each display unit when 3840 x 2160 video signal is divided into 72
by 320 x 360.
Example)
2 (320, 0)
1 (0, 0)
7 (0, 360)
Ambient temperature of display unit. The value of temperature sensor
installed in the cabinet of display unit is displayed.
Total system power on time (unit: hour). The standby time is not
counted.
8 (320, 360)
72 (3520, 1800)
6-19 (E)