Set Lldp Transmission/Reception Mode; Set Type Of Management Address - Yamaha L2 Command Reference Manual

84 | Command Reference | Maintenance and operation functions

4.19.6 Set LLDP transmission/reception mode

[Syntax]
set lldp enable type
set lldp disable
no set lldp enable
[Parameter]
type
[Initial value]
set lldp disable
[Input mode]
LLDP agent mode
[Description]
Sets the LLDP frame transmission/reception mode for the applicable interface.
If you specify set lldp disable, LLDP frames are not transmitted or received.
If this command is executed with the "no" syntax, the setting returns to the default.
[Example]
Set the LLDP transmission/reception mode of LAN port #1 to receive-only.
SWR2311P(config)#lldp run
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#lldp-agent
SWR2311P(config-lldp)#set lldp enable rxonly

4.19.7 Set type of management address

[Syntax]
set management-address-tlv type
no set management-address-tlv
[Parameter]
type
[Initial value]
set management-address-tlv ip-address
[Input mode]
LLDP agent mode
[Description]
Sets the type of port management address used by LLDP.
If this command is executed with the "no" syntax, the setting returns to the default.
The specified value is set in "LLDP Management Address TLV".
[Example]
Set the MAC address as the type of management address for LAN port #1.
: Transmission/reception mode
Setting value
rxonly
txonly
txrx
: Type of management address
Setting value
ip-address
mac-address
Description
Set receive-only mode
Set transmit-only mode
Set transmit and receive
Description
Set IP address as the management address
Set MAC address as the management address