Generate Mst Instance; Set Vlan For Mst Instance - Yamaha L2 Command Reference Manual

6.3.16 Generate MST instance

[Syntax]
instance instance-id
no instance
[Parameter]
instance-id
[Initial value]
none
[Input mode]
MST mode
[Description]
Generates an MST instance.
If this command is executed with the "no" syntax, the MST instance is deleted.
[Note]
MST instance generation and association with a VLAN is specified by the instance vlan command.
[Example]
Generate MST instance #1.
SWR2311P(config)#spanning-tree mst configuration
SWR2311P(config-mst)#instance 1

6.3.17 Set VLAN for MST instance

[Syntax]
instance instance-id vlan vlan-id
no instance instance-id vlan vlan-id
[Parameter]
instance-id
vlan-id
[Initial value]
none
[Input mode]
MST mode
[Description]
Associates a VLAN with an MST instance.
If this command is executed with the "no" syntax, the VLAN association for the MST instance is deleted. If as a result of this
deletion, not even one VLAN is associated with the MST instance, the MST instance is deleted.
If you specify an MST instance that has not been generated, the MST instance will also be generated.
[Note]
You cannot specify a VLAN ID that is associated with another MST instance.
[Example]
Associate VLAN #2 with MST instance #1.
SWR2311P(config)#spanning-tree mst configuration
SWR2311P(config-mst)#instance 1 vlan 2
: <1-15>
Instance ID
: <1-15>
Instance ID
: <2-4094>
VLAN ID set by the vlan command
Command Reference | Layer 2 functions | 181