Set Snmp Group - Yamaha L2 Command Reference Manual

54 | Command Reference | Maintenance and operation functions
[Initial value]
none
[Input mode]
global configuration mode
[Description]
Sets the SNMP MIB view.
The MIB view is the set of MIB objects to specify when allowing access rights.
Up to 16 MIB views can be registered.
The combination of the oid parameter and the type parameter indicates whether the MIB sub-tree following the specified object
ID is or is not subject to management. Taking the oid parameter and the type parameter together as one entry, you can specify
multiple entries for each MIB view, up to a maximum of 8.
When multiple entries are specified, the type parameter for the specified object ID takes priority for entries that are contained at
a lower level within the specified object ID.
If this command is executed with the "no" syntax, the MIB view is deleted. It is not possible to delete individual entries.
[Example]
Specify the "most" view which shows the internet node (1.3.6.1) and below.
SWR2311P(config)#snmp-server view most 1.3.6.1 include
Specify the "standard" view which shows the mib-2 node (1.3.6.1.2.1) and below.
SWR2311P(config)#snmp-server view standard 1.3.6.1.2.1 include

4.10.7 Set SNMP group

[Syntax]
snmp-server group group seclevel read read_view [write write_view]
snmp-server group group seclevel write write_view [read read_view]
no snmp-server group group
[Keyword]
read
write
[Parameter]
group
seclevel
read_view
write_view
Setting value
include
exclude
: Specify the MIB view that can be read by users belonging to this group
: Specify the MIB view that can be written by users belonging to this group
: Group name (maximum 32 characters)
: Security level required of users belonging to this group
Setting value
noauth
auth
priv
: Name of the MIB view (maximum 32 characters) that can be read by users belonging to this group
: Name of the MIB view (maximum 32 characters) that can be written by users belonging to this group
Description
Include the specified object ID in management
Exclude the specified object ID from
management
Description
No authentication / No encryption
(noAuthNoPriv)
Authentication / No encryption (authNoPriv)
Authentication / Encryption (authPriv)