User Account Maintenance; Set User Password - Yamaha L2 Command Reference Manual

28 | Command Reference | Maintenance and operation functions
[Parameter]
switch
[Initial value]
force-password enable
[Input mode]
global configuration mode
[Description]
Enable login with special password.
If this is enabled, only when logging in from a serial console, it is possible to log in using "w,lXlma" (lowercase W, comma,
lowercase L, uppercase X, and lowercase L, M, and A) instead of the specified user password.
If you login with the special password, you will be in priviledged EXEC mode.
If this command is executed with the "no" syntax, login with the special password is disabled.
[Example]
Enable login with special password.
SWR2311P(config)#force-password enable
Disable login with special password.
SWR2311P(config)#no force-password

4.2 User account maintenance

4.2.1 Set user password

[Syntax]
username username [privilege privilege] [password password]
no username username
[Keyword]
privilege
password
[Parameter]
username
privilege
password
: Allow login by special password
Setting value
enable
disable
: Specifies the user's privileges
: Specifies the user's password
: User name
Single-byte alphanumeric characters (32 characters or less)
: Whether to grant privilege
Setting value
on
off
: User's login password
Description
Allow
Don't allow
Description
Password input is not requested when moving to
privileged EXEC mode
Access to WebGUI is allowed with administrator
privileges
Password input is requested when moving to
privileged EXEC mode
Access to WebGUI is allowed with guest