Show Spanning Tree Bpdu Statistics - Yamaha L2 Command Reference Manual

6.3.13 Show spanning tree BPDU statistics

[Syntax]
show spanning-tree statistics [interface ifname]
[Keyword]
interface
[Parameter]
ifname
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows spanning tree BPDU statistics.
If "interface" is omitted, the status of all interfaces is shown.
[Example]
Show the BPDU statistics for LAN port #1.
SWR2311P>show spanning-tree statistics interface port1.1
% BPDU Related Parameters
% -----------------------
% Port Spanning Tree
% Spanning Tree Type
% Current Port State
% Port ID
% Port Number
% Path Cost
% Message Age
% Designated Root
% Designated Cost
% Designated Bridge
% Designated Port Id
% Top Change Ack
% Config Pending
% PORT Based Information & Statistics
% -----------------------------------
% Config Bpdu's xmitted
% Config Bpdu's received
% TCN Bpdu's xmitted
% TCN Bpdu's received
% Forward Trans Count
% STATUS of Port Timers
% ---------------------
% Hello Time Configured
% Hello timer
% Hello Time Value
% Forward Delay Timer
% Forward Delay Timer Value
% Message Age Timer
% Message Age Timer Value
% Topology Change Timer
% Topology Change Timer Value
% Hold Timer
% Hold Timer Value
% Other Port-Specific Info
------------------------
% Max Age Transitions
% Msg Age Expiry
% Similar BPDUS Rcvd
% Src Mac Count
: Specifies the interface to show
: Name of LAN/SFP port or logical interface
Interface to show
Port number = 905 Interface = port1.1
================================
: Enable
: Multiple Spanning Tree Protocol
: Forwarding
: 8389
: 389
: 20000
: 0
: ac:44:f2:30:01:10
: 0
: ac:44:f2:30:01:10
: 0x8389
: FALSE
: FALSE
: 3
: 0
: 2
: 3
: 1
: 2
: ACTIVE
: 0
: INACTIVE
: 0
: INACTIVE
: 0
: INACTIVE
: 0
: INACTIVE
: 0
: 1
: 0
: 0
: 0
Command Reference | Layer 2 functions | 179