Clear Counters; Show Access List Applied To Interface; Set Vlan Access Map And Move To Vlan Access Map Mode - Yamaha L2 Command Reference Manual

224 | Command Reference | Traffic control
If an access list is applied to an interface, and one or more frames that match the conditions are received or forwarded, the total
number (match) of those frames is also shown.
[Example]
Show all lists.
SWR2311P>show access-list
IPv4 access list 1
10 deny any 192.168.1.0/24 host 172.16.1.1 [match= 62]
MAC access list 2001
10 deny host 00A0.DE12.3456 any [match= 123]
IPv6 access list 3002
10 deny 3ffe:506::/32

9.1.11 Clear counters

[Syntax]
clear access-list counters [acl_id]
[Parameter]
acl-id
[Input mode]
priviledged EXEC mode
[Description]
Clears the counters (match) that are shown by the "show access-list" command.
[Example]
Clear counters.
SWR2311P>clear access-list counters

9.1.12 Show access list applied to interface

[Syntax]
show access-group
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
For each interface, shows the ID of all access lists that are applied.
[Example]
Show a list.
SWR2311P>show access-group
Interface port1.7 : IPv4 access group 1 in
Interface port1.10 : IPv6 access group 3002 in
Interface port1.15 : MAC access group 2001 in

9.1.13 Set VLAN access map and move to VLAN access map mode

[Syntax]
vlan access-map access-map-name
no vlan access-map access-map-name
[Parameter]
access-map-name
[Initial value]
none
: <1-2000>, <2001-3000>, <3001-4000>
ID of access list
: Single-byte alphanumeric characters and single-byte symbols(256 characters or less)
Access map name