Http Server; Start Http Server And Change Listening Port Number; Start Secure Http Server And Change Listening Port Number - Yamaha L2 Command Reference Manual

70 | Command Reference | Maintenance and operation functions
[Input mode]
global configuration mode
[Description]
Sets the VLAN interface that allows access to the TFTP server.
If this command is executed with the "no" syntax, the specified interface is deleted
This command can be used to specify up to eight items, which are applied in the order that they are specified.
If this command is not set, access is permitted only from the management VLAN.
[Example]
Allow access to the TFTP server from the hosts connected to VLAN #1 and VLAN #2.
SWR2311P(config)#tftp-server interface vlan1
SWR2311P(config)#tftp-server interface vlan2

4.15 HTTP server

4.15.1 Start HTTP server and change listening port number

[Syntax]
http-server enable [port]
http-server disable
no http-server
[Keyword]
enable
disable
[Parameter]
port
[Initial value]
http-server disable
[Input mode]
global configuration mode
[Description]
Enables the HTTP server. You can also specify the listening TCP port number.
If this command is executed with the "no" syntax, the function is disabled.
[Example]
Start the HTTP server with 8080 as the listening port number.
SWR2311P(config)#http-server enable 8080

4.15.2 Start secure HTTP server and change listening port number

[Syntax]
http-server secure enable [port]
http-server secure disable
no http-server secure
[Keyword]
enable
disable
[Parameter]
port
: HTTP server is enabled
: HTTP server is disabled
: <1-65535>
Listening port number of the HTTP server (if omitted: 80)
: Enable the secure HTTP server
: Disable the secure HTTP server
: <1-65535>