Set Banner - Yamaha L2 Command Reference Manual

30 | Command Reference | Maintenance and operation functions
Line Own
-------------------------------------------------------------------------------------
---------
con 0
vty 0 *
vty 1
vty 2
vty 3
vty 4
vty 5
vty 6
vty 7
http 0
http 1
http 2
http 3

4.2.3 Set banner

[Syntax]
banner motd word
no banner motd
[Parameter]
word
[Initial value]
no banner motd
[Input mode]
global configuration mode
[Description]
Sets the banner that is displayed when logging in to the console.
[Example]
Set the banner display to "Hello World!".
Username:
Password:
SWR2311P Rev.2.02.06 (Tue Mar 13 08:41:39 2018)
Copyright (c) 2018 Yamaha Corporation. All Rights Reserved.
SWR2311P>enable
SWR2311P#configure terminal
Enter configuration commands, one per line.
SWR2311P(config)#banner motd Hello World!
SWR2311P(config)#exit
SWR2311P#exit
Username:
Password:
Hello World!
SWR2311P>enable
SWR2311P#configure terminal
Enter configuration commands, one per line.
SWR2311P(config)#no banner motd
SWR2311P(config)#exit
SWR2311P#exit
Username:
Password:
SWR2311P Rev.2.02.06 (Tue Mar 13 08:41:39 2018)
Copyright (c) 2018 Yamaha Corporation. All Rights Reserved.
User
user1234
operators1
abcdefghijklmnopqrstuvwxyzabcdef
-
-
-
-
-
-
user1234
(noname)
-
-
: Single-byte alphanumeric characters and single-byte symbols ( 256 characters or less)
Status Login time
Login 02:15:23
Login 00:12:59
Login 00:00:50
Login 00:00:21
- -
- -
- -
- -
- -
Login 01:12:25
Login 00:18:04
- -
- -
End with CNTL/Z.
End with CNTL/Z.
IP address
192.168.100.1
192.168.100.24
192.168.100.10
192.168.100.4
192.168.100.102