154 | Command Reference | Interface control
SWR2311P(config)#power-inline enable
Disable the system-wide PoE power supply function.
SWR2311P(config)#power-inline disable
5.6.2 Set PoE power supply function (interface)
[Syntax]
power-inline switch
no power-inline
[Parameter]
switch
[Initial value]
power-inline enable
[Input mode]
interface mode
[Description]
Set the applicable interface PoE power supply function as enabled or disabled.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
This will result in a command execution error on all other ports besides PoE port.
Even if the power supply function is enabled with interface mode, power will not be supplied in the following circumstances.
•
When the system-wide PoE power supply function is disabled
•
When the applicable interface mode is in shutdown state
[Example]
Enable the PoE power supply function for port1.1.
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#power-inline enable
Disables the PoE power supply function for port1.1.
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#power-inline disable
5.6.3 Set description of PoE port
[Syntax]
power-inline description line
no power-inline description
[Parameter]
line
[Initial value]
none
[Input mode]
interface mode
:
PoE power supply function settings for the applicable interface
Setting value
enable
disable
:
Single-byte alphanumeric characters (64 characters or less)
Description
Enables the PoE power supply function for the
applicable interface
Disables the PoE power supply function for the
applicable interface