Set Static Arp Entry; Set Arp Timeout; Ipv4 Ping - Yamaha L2 Command Reference Manual

7.3.3 Set static ARP entry

[Syntax]
arp ip_address mac_address interface
no arp ip_address
[Parameter]
ip_address
mac_address
interface
[Initial value]
none
[Input mode]
global configuration mode
[Description]
Creates a static group ARP entry.
If this command is executed with the "no" syntax, the specified entry is deleted.
[Example]
Create a static ARP entry of IP address 192.168.100.100 and MAC address 00a0.de00.0000 connected to port1.1.
SWR2311P(config)#arp 192.168.100.100 00a0.de00.0000 port1.1

7.3.4 Set ARP timeout

[Syntax]
arp-ageing-timeout time
no arp-ageing-timeout [time]
[Parameter]
time
[Initial value]
arp-ageing-timeout 1200
[Input mode]
interface mode
[Description]
Changes the length of time that ARP entries are maintained in the applicable VLAN interface. ARP entries that are not received
within this length of time are deleted.
If this command is executed with the "no" syntax, the ARP entry timeout is set to 1200 seconds.
[Example]
Change the ARP entry ageing timeout for VLAN #1 to five minutes.
SWR2311P(config)#interface vlan1
SWR2311P(config)#arp-aging-timeout 300

7.4 IPv4 ping

7.4.1 IPv4 ping
[Syntax]
ping host [repeat count] [size datalen] [timeout timeout]
: A.B.C.D
IP address
: HHHH.HHHH.HHHH
MAC address
: portN.M
Physical interface name
: <1-3000>
ARP entry ageing timeout (seconds)
Command Reference | Layer 3 functions | 197