Set Remarking Of Aggregate Policers - Yamaha L2 Command Reference Manual

248 | Command Reference | Traffic control
PIR
CBS
PBS
action
[Input mode]
aggregate policer mode
[Description]
Specifies a twin rate policer as an aggregate policer.
If this is executed with the "no" syntax, metering/policing/remarking processing is deleted.
Metering on the SWR2311P is implemented as a single-rate three-color marker (RFC2697), and the following processing can
be specified for the categorized bandwidth classes.
• Green : Only forward (cannot be specified)
• Yellow : Choose forward, discard, or remark
• Red : Choose discard or remark
However, remarking can be specified for either Yellow or Red, not both.
Detailed remarking settings are made using the remark-map command (aggregate policer mode). Regardless of whether action
is set to "remark," remarking is disabled if there are no detailed remarking settings for that bandwidth class. In this case, the
default settings (Yellow: forward, Red: discard) are applied.
[Note]
In order to execute this command, QoS must be enabled.
[Example]
Create an aggregate policer "AGP-01".
• Executing metering by TrTCM with CIR:48kbps, PIR:96kbps, CBS:12kbyte, and EBS:12kbyte
• Yellow: rewrite DSCP value to 10, Red: discard
[Aggregate policer creating]
SWR2311P(config)#aggregate-police AGP-01
SWR2311P(config-agg-policer)#police twin-rate 48 96 12 12 yellow-action remark red-
action drop
SWR2311P(config-agg-policer)#remark-map yellow ip-dscp 10
SWR2311P(config-agg-policer)#exit

9.2.32 Set remarking of aggregate policers

[Syntax]
remark-map color type value
no remark-map
[Parameter]
color
Traffic rate (kbps)
: <1 - 102300000>
Peak traffic rate (kbps). A value less than CIR cannot be specified.
: <11 - 2097120>
Burst size of conformant token bucket (kbyte)
: <11 - 2097120>
Burst size of peak token bucket (kbyte)
: Operation for packets categorized by bandwidth class
Setting value
transmit
drop
remark
: Bandwidth class to remark
Setting value
yellow
Operation
Forward
Discard
Remarking (CoS/TOS/DSCP)
Description
Make remarking settings for bandwidth class
Yellow