Set Lacp System Priority Order - Yamaha L2 Command Reference Manual

Information shows the following items.
Item
LAG
Admin Key
Port priority
Ifindex
Timeout
Active
Synchronized
Collecting
Distributing
Defaulted
Expired
[Example]
Shows the status of LACP logical interface.
SWR2311P#show etherchannel
% Lacp Aggregator: po10
% Load balancing: src-dst-mac
% Member:
port1.17
port1.19
port1.21
port1.23
Shows the status of the LAN/SFP ports that make up the LACP logical interface.
SWR2311P#show etherchannel port1.17
Etherchannel port1.17
Physical admin key
Receive machine state
Periodic Transmission machine state
Mux machine state
Selection
Information
LAG
Admin Key
Port Priority
Ifindex
Timeout
Active
Synchronized
Collecting
Distributing
Defaulted
Expired

5.2.5 Set LACP system priority order

[Syntax]
lacp system-priority priority
no lacp system-priority
[Parameter]
priority
[Initial value]
lacp system-priority 32768
Actor
0x8000, 00-a0-de-e0-e0-e0
0001
32768
5017
Long
1
1
1
1
0
0
: <1-65535>
LACP system priority irder
Lower numbers have higher priority
Command Reference | Interface control | 127
Description
LACP system ID (priority, MAC address)
ID that is the basis of the LACP key (logical port number)
LACP port priority order
Interface number
Timeout value ("Long"=90 seconds, "Short"=3 seconds)
LACP operation mode("Active", "Passive")
Synchronization flag
Collecting flag
Distributing flag
Defaulted flag
Expired flag
3
Current
Slow periodic
Collecting/Distributing
Selected
Partner
0x8000, 00-a0-de-11-11-11
0001
32768
5017
Long
1
1
1
1
0
0