Set Dscp - Egress Queue Id Conversion Tabl; Set Port Priority Order - Yamaha L2 Command Reference Manual

232 | Command Reference | Traffic control
[Example]
Assign egress queue #4 to CoS value "0".
SWR2311P(config)#qos cos-queue 0 4
Return the egress queue ID of CoS value "0" to the default value.
SWR2311P(config)#no qos cos-queue 0

9.2.8 Set DSCP - egress queue ID conversion tabl

[Syntax]
qos dscp-queue dscp-value queue-id
no qos dscp-queue dscp-value
[Parameter]
dscp-value
queue-id
[Initial value]
See [Note]
[Input mode]
global configuration mode
[Description]
Specifies the values of the DSCP - egress queue ID conversion table that is used to determine the egress queue.
If this is executed with the "no" syntax, the egress queue ID for the specified DSCP value is returned to the default setting.
The DSCP - egress queue ID conversion table is used when the trust mode is set to DSCP.
[Note]
In order to execute this command, QoS must be enabled.
The following table shows the default settings of the DSCP - egress queue ID conversion table.
DSCP value
0-7
8-15
16-23
24-31
32-39
40-47
48-55
56-63
[Example]
Assign egress queue #4 to DSCP value "0."
SWR2311P(config)#qos dscp-queue 0 4
Return the egress queue ID of DSCP value "23" to the default value.
SWR2311P(config)#no qos dscp-queue 23

9.2.9 Set port priority order

[Syntax]
qos port-priority-queue queue-id
no qos port-priority-queue
: <0-63>
DSCP value of the conversion source
: <0-7>
Egress queue ID corresponding to DSCP value
Egress queue
2
0
1
3
4
5
6
7