Sony 158SVR2000 Setup Manual page 36

36 I
Back Panel Connections Reference
button on the front of the box. Place the IR EmItter (from the IR Control cable) on top
of the receIver, stIckIng out slightly. The IR EmItter has an adheSIve stnp so you can
adhere It to the set-top box. If It IS not possible to stIck the IR EII1ltter directly onto the
receIver, place It In front of or as close as possible to the receIver. Ignore thIS jack If
you're USIng the Cntd Out (Senal) jack.
You can also use the IR Control cable to save programs to your Sony VCR. Plug the
supplied IR Control cable Into the Cntd Out IR jack on the back of the SVR Recorder.
PosItIon the first IR EmItter m front of the IR receIver on your Sony VCR. You can
secure the IR EmItter (from the IR Control cable) USIng the supplied adheSIve stnp.
OptIOnally, pOSItIon the second IR EmItter m front of the IR receIver on your satellite
set-top box or cable set-top box so It IS slightly extended.
Once thIS connectIOn IS made, refer to your TiVo Viewer's GUIde for InstructIons on
how to save programs to your VCR.
Audio Rand L Inputs
Use these jacks if you have a satellite set-top box, cable set-top box, or digItal cable
set-top box. Connect the left (whIte) and nght (red) audio oUtjacks of your set-top box
to the SVR Recorder's audio mput usmg the AudioNideo cables (supplied). Note that
you will use these jacks for audio If you're USIng eIther the yellow Video Input or
S-Video Input. Ignore these jacks if you're USIng the RF In jack.
Composite Video Input
Use thIS jack If your satellite set-top box, cable set-top box, or digItal cable set-top box
does not Include an S-Video Output jack. Connect the Video Out of your set-top box to
the SVR Recorder usmg the VIdeo connector (yellow) on the AudioNideo cables
(supplied). Use thIS jack only If you can't use S-Video Input. Ignore thIS jack If you're
usmg the RF In jack.