Sony 158SVR2000 Setup Manual page 165

~
ANTENNA or CABLE without box
~
Phone
I
Cnlrl IN
line
Oul
Serial Audio
o
R l Video S-Video
~
.00
~
•
•
y
• •
•
•
Connect a telephone line
It is not necessary to install a separate phone line Plug the Recorder into any existing phone jack, see
G
If the phone jack is used for another phone, use the provided splitter. Do not connect the SVR Recorderto
digital PBX systems. You could permanently damage your SVR Recorder's modem.
Don't have a phone close by? No problem!
The SVR Recorder ships with a 50' phone cord, and does not
need to be connected all the time Simply run the phone cord across the room to any phone jack within
reach. After Guided Setup completes, you can unplug the phoneline and store it with the SVR Recorder
You only need to reconnect to the phone line about once or twice a week Plug in the phone line, then
go to "Messages and Setup," "Phone Connection" and choose" Make Daily Call Now"
Power on and tune your TV
Once you have connected all the cables, plug in the SVR Recorder and turn on your TV, see
0
Find the correct TV input
Much like when watching tapes on your VCR, you'll need to tune your TV to the correct channel or video
source so that it displays the Welcome to TiVo screen If you are using RF cables, tune to channel 3 or 4.
If you are using Composite or S-Video, use the TV /Video or Input button on your TV If you are passing
the signal through your VCR, tune your TV the way you would watch your VCR Try also turning your VCR
on or off If your VCR has multiple inputs, you may need to select input 1 or input 2 on the VCR as well