Sony 158SVR2000 Setup Manual page 23

Note
A serial connection works better than IR, so
use senal when possible.
Use thIs example If you have a satellite set-top box wIth a senal connectIOn, and your
satellite set-top box uses S-vIdeo cables.
1
Connect the SVR Recorder to your satellite set-top box.
Connect one end of the Senal Control cable (supplied) to the Cntrl Out Senal In
Jack on the back of the SVR Recorder.
Your satellite set-top box may have two Jacks that look like SerIal Control Jacks. If
so, use the one labeled "low speed data." You may need to use the 9 to 25 pm
senal adapter (supplied) to match your Jacks, or the RCA Home Control cable (for
some RCA boxes).
2
Connect your program source/video input to the SVR Recorder.
DIsconnect any cables that you have connectmg your satellite set-top box to your
VCR and/or TV Use the S-Video cable (supplied) to connect the S-Video Out of
your satellite set-top box to the S-Video mput on the back of the SVR Recorder.
You must also use the left (whIte) and nght (red) AudioNideo cables to connect
the Audio Out on your satellite set-top box to Audio In on the back of the SVR
Recorder, as illustrated here.
3
Continue.
Now contmue WIth step 3 on page 32.
-
m o
.co
c
~
_.~
"C
CD
3 ()
CD::!:
~ ~
-(Q
~
c
...
Connection Examples
I
23