Sony 158SVR2000 Setup Manual page 201

Guided Setup
Connection to Recorder screens.
If you chose satellite or cable with a box as your
program source, you'll see some of the following Connection to Recorder screens.
These screens ask what type of video cable you used to connect your set-top box to
your Recorder.
If you have satellite
only or cable with a
box only:
Use the UPIDOWN arrows until the picture of the Recorder
matches the cable connection you used to connect your satellite
receiver or cable box. When the video status says "Video OK,"
press SELECT to continue. If the video status says "No Video,"
double check that the video cable is firmly connected to the
Recorder and that you have selected the COlTect type of video cable.
If you have satellite
and antenna
or
satellite and cable
without a box:
34
Use the UPIDOWN
arrows to highlight
"Satellite Box" and
press SELECT.
Use the UP/DOWN arrows until the
picture of the Recorder matches the
cable connection you used to
connect your satellite receiver.
When the Video Status says "Video
OK," press SELECT to continue. If
not, double check that the video
cable is firmly connected to the
Recorder and that you have selected
the correct type of video cable.
Use the UP/DOWN
arrows to highlight
"Accept these input
settings" and press
SELECT to continue
with Guided Setup.