Sony 158SVR2000 Setup Manual page 25

Use thIS example If you have a satellite set-top box and VCR, no Senal Control Jack,
and your satellite set-top box uses S-Video cables.
1
Connect the SVR Recorder to your satellite box.
Since you use a satellite set-top box to receIve your televlSlon sIgnal, the SVR
Recorder needs to be able to change channels on your box m order to record
shows and display live TV
Connect the SVR Recorder to the mfrared (IR) receIver of your satellite set-top
box usmg the IR Control cable (supplied). Start by pluggmg the IR Control cable
mto the Cntrl Out IR Jack on the back of the SVR Recorder. Next, locate the IR
receIver on your satellite set-top box -It'S usually a small dark red wmdow or
button on the front of the box.
Place the IR EmItter (from the IR Control cable) on top of the satellite set-top box,
stIckmg out slightly. The IR EmItter has an adhesIve stnp so you can adhere It to
the set-top box. If It IS not possible to stick the IR EmItter directly onto the
wmdow, place It m front of or as close as possible to the wmdow.
2
Connect your program source/video input to the SVR Recorder.
DIsconnect any cables that you have connectmg your satellite set-top box to your
VCR and/or TV Use the S-Video cable (supplied) to connect the S-Video Out of
your satellite set-top box to the S-Video mput on the back of the SVR Recorder.
You must also use the left (whIte) and nght (red) AudioNideo cables to connect
the Audio Out on your satellite set-top box to the Audio In on the back of the SVR
Recorder, as illustrated here.
3
Continue.
Now contmue wIth step 3 on page 32.
-
m o
.00
c:: :::s
-':::s
'OeD
3 (")
eD~
:::s :::s
-co
~
c:: ...
Connection Examples
125