ETHERNET/COAX
CONNECTION
– Automatic by DHCP - sets the MTU according to the
DHCP connection
– Manual - allows you to manually set the MTU to be set.
COAX LINK
To set the Channel:
Select the coax link channel as 1 to 3.
1.
Select the On or Off radio button in the Auto Detection field.
2.
To set privacy, select the Enabled check box. This causes
3.
all devices connected to the coaxial cable to use the same
password. This is recommended.
To set the password, enter the Coax Link password in the
4.
Password field.
To enable or disable the Coax link, click Disable or Enable.
5.
To view the devices connected using the coaxial cable, click
6.
the Go to WAN Coax Stats link.
COMPLETE ALL ETHERNET/COAX CONNECTION
CONFIGURATION UPDATES