Verizon FiOS-G1100 Quantum User Manual page 73

Once enabled and configured, the DHCP server automatically assigns
IP addresses to any network devices which are set to obtain their IP
address dynamically.
If DHCP Server is enabled on your Gateway, configure the network
devices as DHCP Clients. There are 2 basic options in this section:
Disabled and DHCP Server.
To set up the Gateway's network bridge to function as a DHCP server:
In the IP Address Distribution section, select the DHCP
1.
server. Once enabled, the DHCP server provides automatic
IP assignments (also referred to as IP leases) based on the
preset IP range defined below.
Start IP Address – Enter the first IP address in the IP
•
range that the Gateway will automatically begin assigning
IP addresses from. Since your Gateway's IP address is
192.168.1.1, the default Start IP Address is 192.168.1.2.
verizon.com/fios |
05 / USING NETWORK
CONNECTIONS
©
2014 Verizon. All Rights Reserved.
72