Verizon FiOS-G1100 Quantum User Manual page 159

Specify the following parameters:
3.
Name – select the network type.
•
Destination - enter the destination IP of the destination
•
host, subnet address, network address, or default route.
The destination for a default route is 0.0.0.0.
Netmask – enter the network mask. This is used in
•
conjunction with the destination to determine when a
route is used.
Gateway – enter the IP address of your Gateway.
•
Metric – enter a measurement preference of the route.
•
Typically, the lowest metric is the most preferred route.
If multiple routes exist to a specific destination network,
the route with the lowest metric is used.
Click Apply to save changes.
4.
IP ADDRESS DISTRIBUTION
8.4c/
You can easily add computers configured as DHCP clients to the
network. The DHCP server provides a mechanism for allocating IP
addresses to these hosts and for delivering network configuration
parameters to the hosts.
For example, a client (host) sends a broadcast message on the network
requesting an IP address for itself. The DHCP server then checks its
list of available addresses and leases a local IP address to the host for
a specific period of time and simultaneously designates this IP address
verizon.com/fios |
08 / CONFIGURING
ADVANCED SETTINGS
©
2014 Verizon. All Rights Reserved.
158