NETWORK (HOME/OFFICE)
CONNECTION
End IP Address – Enter the last IP address in the IP range
•
that the Gateway will automatically stop the IP address
allocation at. The maximum end IP address range that can
be entered is 192.168.1.254.
If Windows Internet Naming Service (WINS) is being used,
2.
enter the WINS server address.
In the Lease Time in Minutes field, enter the amount of time
3.
a network device is allowed to connect to the Gateway with
its currently issued dynamic IP address.
Click Apply to save changes.
4.
ROUTING
You can configure your Gateway to use static or dynamic routing.
Static routing – specifies a fixed routing path to neighboring
•
destinations based on predetermined metrics.
Dynamic routing – automatically adjusts how packets travel
•
on the network. The path determination is based on network/
device reachability and status of network being traveled.
To configure routing:
In the Routing Table section, click Add New Route to display
1.
and modify the new route configuration page.