Verizon FiOS-G1100 Quantum User Manual page 153

Specify the Stateless settings to be used to assign LAN IPv6
2.
addresses by entering the following details:
IPv6 LAN Configuration (select Stateless from the drop-
•
down list) as shown in drop-down list and page below:
LAN Prefix (automatically populated)
•
LAN IPv6 Link Local Address (automatically populated)
•
Router Advertisement Lifetime (minutes between 0-150)
•
Interfaces - check one or more of the box(s) to apply IPv6
•
LAN settings to the selected interfaces:
– Ethernet/Coax IPv6 Enabled
– Wireless Access Point 1 IPv6 Enabled
– Wireless Access Point 2 IPv6 Enabled
After entering all appropriate IPv6 settings click Apply to
3.
have changes take effect.
verizon.com/fios |
08 / CONFIGURING
ADVANCED SETTINGS
©
2014 Verizon. All Rights Reserved.
152