Verizon FiOS-G1100 Quantum User Manual page 162

ROUTING
To enable the DHCP server, select DHCP Server in the IP
2.
Address Distribution field.
Once enabled, the DHCP server provides automatic IP
assignments (IP leases) based on the preset IP range defined
below.
To configure the DHCP server complete the following fields:
3.
Start IP Address – enter the first IP address that your
•
Gateway will automatically begin assigning IP addresses
from. Since your Gateway's default IP address is
192.168.1.1, the default start IP address should be
192.162.1.2.
End IP Address – enter the last IP address that your
•
Gateway will automatically stop the IP address allocation.
The maximum end IP address range that can be entered is
192.168.1.254.
WINS Server – determines the IP address associated with
•
a network device.
Lease Time in Minutes – assigns the amount of time in
•
minutes that each device is assigned an IP address by the
DHCP server when it connects to the network.
When the lease expires, the server determines if the
computer has disconnected from the network. If it has,
the server may reassign this IP address to a newly-
connected computer.
Provide Host Name if Not Specified by Client – when
•
activated, your Gateway assigns a default name to the
client, if the DHCP client has no host name.