Verizon FiOS-G1100 Quantum User Manual page 14

GETTING TO KNOW
THE GATEWAY
USB - provides up to 500 mA at 5 VDC for attached devices.
•
For example, you could charge a cell phone. In the future, with a
firmware upgrade, the USB host functionality may be available for
other devices, such as external storage and cameras. Firmware
updates are performed automatically by Verizon.
Reset Button - allows you to reset your Gateway to the factory
•
default settings. To reset the Gateway, press and hold the Reset
button for at least three seconds.
Ethernet LAN - connects devices to your Gateway using Ethernet
•
cables to join the local area network (LAN). The four Ethernet LAN
ports are 10/100/1000 Mbps auto-sensing and can be used with
either straight-through or crossover Ethernet cables.
HAN Expansion Port - provides for future hardware upgrades to
•
add support for Home Area Networking capabilities.
Ethernet WAN - connects your Gateway to the Internet using an
•
Ethernet cable.
Coax WAN and LAN - connects your Gateway to the Internet and/or
•
to other MoCA devices using a coaxial cable.
Warning:
The WAN Coax Port is intended for connection to Verizon FiOS
only. It must not be connected to any exterior or interior coaxial wires not
designated for Verizon FiOS.
Power - connects your Gateway to an electrical wall outlet using the
•
supplied power adapter.
Warning:
The included power adapter is for home use only, supporting
voltages from 100-240Vac. Do not use in environments with greater than
240Vac.