First, check the connection and verify all cables are connected
correctly. Then verify the Gateway is still connected and check
the Ethernet connection to the Gateway from the computer.
I USED DHCP TO CONFIGURE MY NETWORK. DO I
10.1k/
NEED TO RESTART MY COMPUTER TO REFRESH MY IP
ADDRESS?
No. In Windows 7, unplug the Ethernet cable or wireless card,
then plug it back in.
I CANNOT ACCESS MY GATEWAY GUI. WHAT SHOULD I
10.1l/
DO?
If you cannot access the GUI, verify the computer connected to
your Gateway is set up to dynamically receive an IP address.
I HAVE A FTP OR WEB SERVER ON MY NETWORK.
10.1m/
HOW CAN I MAKE IT AVAILABLE TO USERS ON THE
INTERNET?
For a web server, enable port forwarding for port 80 to the IP
address of the server. Also, set up the web server to receive
that port. Configuring the server to use a static IP address is
recommended.
For a FTP server, enable port forwarding for port 21 to the IP
address of the server. Also, set up the web server to receive
that port. Configuring the server to use a static IP address is
recommended.
verizon.com/fios
|
10 / TROUBLESHOOTING
©
2014 Verizon. All Rights Reserved.
194