Mounting The Gateway To A Wall - Verizon FiOS-G1100 Quantum User Manual

1.3d/

MOUNTING THE GATEWAY TO A WALL

For optimum performance, the FiOS Quantum Gateway is designed to
stand in a vertical upright position. Verizon does not recommend wall
mounting the FiOS Quantum Gateway. However, if you wish to mount
your Gateway, you can purchase a wall mount bracket from the Verizon
FiOS Accessories Store at verizon.com/fiosaccessories.
If you are replacing an existing Verizon wall mounted router, you do
not need to remove the mounting screws from the wall. The existing
mounting screws will fit the new bracket.
To mount your Gateway to a wall:
Remove the foot by turning the Gateway upside down
1.
and removing the single screw that holds the foot to the
Gateway.
Slide the foot toward the front of the Gateway and pull the
2.
foot from the holes. You may need to wiggle the foot slightly.
You may use the wall mount bracket as a template for
3.
positioning the Gateway.
verizon.com/fios |
01 / INTRODUCTION
©
2014 Verizon. All Rights Reserved.
14