Page 2
Follow these steps 1. Connect the ethernet cable from the WAN port on your router to a wall outlet. Ethernet If you have Fios ® connect the coax cable. Coax 2. Connect the power cord. 3. Activation takes up to 15 minutes. 4.
Wait at least 15 minutes for router to activate once plugged in. Router lights will flash and turn off/on during activation. After 15 minutes When back light is red, Verizon support is needed. When GLOBE light is flashing red, Verizon support is needed. Support Go online to verizon.com/internetsetup...