ROUTING
LAN IPv6 CONFIGURATION WITHOUT AN IPv6 WAN
CONNECTION:
To configure IPv6 to use either the IPv6 LAN Stateful
1.
or Stateless mode without using an IPv6 Internet WAN
connection, select the None option on the IPv6 Configuration
Control Page as shown below:
After entering all appropriate IPv6 settings click Apply to
2.
have changes take effect.
LAN IPv6 STATEFUL (DHCPv6) WITH NO WAN SETTINGS:
To configure IPv6 LAN Stateful mode with No WAN
1.
connection, select the Stateful option on the IPv6
Configuration Control Page as shown below: