Ring And Tone; Table 1.15 System Ring Cycle; Table 1.16 System Tone Cycle - Samsung OFFICESERV 7100 Service Manual

1.3.4 Ring and Tone

Ring Cycle
The OfficeServ 7100 system provides C.O. line ring, extension line ring, door ring, and
alarm ring. The On/off cycles for each ring are as follows:
C.O. line Ring
Extension Line Ring
Door Ring
Alarm Ring
Ring ON/OFF Cycle
An ON/OFF cycle can be adjusted by changing the system database value.
Tone
The ring signal output voltage and frequency of the OfficeServ 7100 are as follows:
Output Voltage: 75 V
Frequency: 20 Hz
The OfficeServ 7100 provides some tones to guide users the progress status of the functional
operation and provides the feedback for the status. The On/Off cycle for each tone specified
are as follows:
Outgoing Tone
Busy Tone
DND
Ring Back Tone
Call Park
Check/CAution/Forced Override
Call Back/Hold
Connection
Error/Unobtainable Tone
Message Park Tone of Regular Phone
© SAMSUNG Electronics Co., Ltd.

Table 1.15 System Ring Cycle

Ring
1000/2000 ms
400/200/400/3000 ms
400/200/400/200/400/2000 ms
400/200/400/200/400/200/400/1000 ms

Table 1.16 System Tone Cycle

Tone
1000/250 ms
500/500 ms
250/250 ms
1000/2000 ms
Continuous
50/50 ms
500/3500 ms
1000/2000 ms
250/250 ms
Continuous
OfficeServ 7100 Service Manual
ON/OFF Cycle
ON/OFF Cycle
1-13