Tcp/Udp Ports; System Tcp/Udp Port Numbers - Samsung Officeserv 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
data packets. Since data packets are smaller and sampled more often, a large data
package can consume the time needed to send the voice packets and cause lost or
delayed packets. The most common methods used by router manufactures are Low
Latency Queuing, Fair Queuing, Weighted Fair Queuing, RSVP Queuing and
Fragmentation. Insuring these options are available will assist in providing a good
quality of service.
In all, QoS can be a complicated endeavor when transporting voice over an
unmanaged public Internet environment. The OfficeServ 7100 has many tools
embedded to allow adjustments for VoIP QoS but they are not the catch-all solution to
total network quality which should be governed by the network equipment.

TCP/UDP Ports

In the IP environment ports are used for specific connections. These ports need to be
known to travese routers, firewalls and to provide prioritization in certain environments.
The IP ports and port types utilized by the OfficeServ 7100 are listed in Table 5.

System TCP/UDP Port numbers

Table 5. OfficeServ 7100 TCP/RTP/UDP Port
Service Type Port Number
VoIP Networking 6100
IP Phone interface 6000
(system side)
H.323 Gateway 1719
1720
1024 ~ 4999
SIP Gateway 5060
MGI, MGI16 30000~30031
IP Phone 6000
(phone side) 9000, 9001
OfficeServ SM 5001
CTI 5002
Program Upload 5003
Protocol Remarks
TCP For connection setup
TCP/UDP For connection setup
UDP For connection with Gatekeeper
TCP For connection setup
TCP For maintaining TCP Connection
UDP For connection setup
RTP Even port: RTP for each MGI channel
RTCP Odd port : RTCP for each MGI channel
(also seen
as UDP)
UDP Signaling for MP10/MP10a
RTP,RTCP Voice data for MGI or ITP
TCP OfficeServ 7400 SM connection
TCP CTI Connection
TCP Program upload to Smart Media
2.6.24
Table of Contents
Home Page
SPECIAL APPLICATIONS
PART 2 JANUARY 2009