Installing The Hose Guide - Toro Reelmaster 7000-D Operator's Manual

Positioning the Turf Compensating Spring and Installing
the Hose Guide (continued)
4. Assemble the bolt
spring to the right tab
with the flange locknut (3/8 inch)
5. Align the studs
the holes in the cutting-unit frame and the turf-
compensator bracket
Note:
aligns toward the center of the machine
6. Assemble the hose guide and turf-
compensator bracket to the cutting-unit frame
with the 2 flange locknuts (3/8 inch)
7. Torque the locknuts and bolts to 37 to 45 N∙m
(27 to 33 ft-lb).

Installing the Hose Guide

Cutting Unit 5
Cutting unit 1
Cutting unit 2
Setup: Installing the Cutting Units
of the turf compensation
of the carrier frame
of the left hose guide with
.
The support loop of the hose guide
Cutting unit 3
Cutting unit 4
.
G410296
.
.
G410297
G410309
Cutting unit 5
Reel motor
Page 3–4
Weight
3466-702 A