Servicing The Engine Cooling System - Toro Reelmaster 7000-D Operator's Manual
4-wheel drive traction unit
Hide thumbs
Also See for Reelmaster 7000-D:
- Service manual (468 pages) ,
- Operator's manual (120 pages) ,
- Installation instructions (2 pages)
Table of Contents
Advertisement
Servicing the Engine Cooling System
1. Prepare the machine for maintenance.
2. Unlatch and open the rear screen.
Latch keeper
3. Clean both sides of the screen.
4. Lift the screen off the hinge pins, and remove the screen from the machine.
5. Open the hood.
6. Clean both sides of the oil cooler/radiator area thoroughly with compressed air. Start
from the front and blow the debris out toward the back. Then clean from the back side
and blow toward the front. Repeat the procedure several times until all chaff and debris
is removed.
Cleaning the oil cooler/radiator with water may promote premature corrosion damage
to components and compact debris.
Maintenance: Cooling System Maintenance
G425401
Rear screen latch
IMPORTANT
Page 6–40
3466-702 A
Advertisement
Table of Contents
