Toro Reelmaster 7000-D Operator's Manual page 54

Overview of the InfoCenter Display (continued)
Main Menu
Menu Item
Faults
Service
Diagnostics
Settings
About
Service
Menu Item
Hours
Counts
Diagnostics
Menu Item
Cutting Units
Hi/Low Range
PTO
Engine Run
Backlap
Operation: Before Operation
Description
The Faults menu contains a list of the recent
machine faults. Refer to the Service Manual or
your Authorized Toro Distributor for more
information on the Faults menu and the
information contained there.
The Service menu contains information on the
machine such as hours of use, counters, and
other similar numbers.
The Diagnostics menu displays the state of
each machine switch, sensor, and control
output. You can use this to troubleshoot certain
issues as it will quickly tell you which machine
controls are on and which are off.
The Settings menu allows you to customize and
modify configuration variables on the display.
The About menu lists the model number, serial
number, and software version of your machine.
Description
Lists the total number of hours that the machine,
engine and PTO have been on, as well as the
number of hours the machine has been
transported and service due.
Lists numerous counts the machine has
experienced.
Description
Indicates the inputs, qualifiers, and outputs for
raising and lowering the cutting units.
Indicates the inputs, qualifiers, and outputs for
driving in transport mode.
Indicates the inputs, qualifiers, and outputs for
enabling the PTO circuit.
Indicates the inputs, qualifiers, and outputs for
starting the engine.
Indicates the inputs, qualifiers, and outputs for
operating the backlap function.
Page 5–8 3466-702 A