Changing the Engine Oil and Filter
Draining the Engine Oil
1. Prepare the machine for maintenance.
2. Remove the oil fill cap.
3. Align a drain pan under the drain plug
4. Remove the drain plug and let the oil drain into
the pan.
5. When oil stops draining from the engine, install
the drain plug and torque it to 54 to 63 N∙m (40
to 47 ft-lb).
Changing the Oil Filter
1. Rotate the oil filter
remove it.
2. Wipe the filter adapter
3. Apply a light coat of clean oil to the seal of the
new filter.
4. Thread the filter onto the filter adapter until the
filter contacts the adapter, then tighten the filter
an additional turn.
Note:
Maintenance: Engine Maintenance
counterclockwise to
clean.
Do not overtighten the filter.
.
G424298
G424333
Page 6–16
3466-702 A