Toro Reelmaster 7000-D Operator's Manual page 56

Overview of the InfoCenter Display (continued)
About
Menu Item
Display Revision
CAN Bus
Protected Menus
There are operating configuration settings that are adjustable within the Settings Menu of
the display. To lock these settings, use the Protected Menu.
Note:
At the time of delivery, the initial password code is programmed by your distributor.
Accessing Protected Menus
Note:
The factory default PIN code for you machine is either 0000 or 1234.
If you changed the PIN code and forgot the code, contact your authorized Toro distributor for
assistance.
1. From the Main Menu, use the center button to
scroll down to the Settings Menu and press
the right button.
2. In the Settings Menu, use the center button to
scroll down to the Protected Menu and press
the right button
3. To enter the PIN code, press the center button
until the correct first digit appears, then
press the right button
digit. Repeat this step until the last digit is
entered and press the right button once more.
4. Press the middle button
code. Wait until the red indicator light of the
display illuminates.
Note:
the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
5. To lock the protected menu, rotate the key
switch to the O
position.
Operation: Before Operation
.
to move on to the next
to enter the PIN
If the display accepts the PIN code and
position and then to the O
FF
Description
Lists the software revision of the display.
Lists the machine communication bus status.
G438980
N
G438981
Page 5–10 3466-702 A