Toro Reelmaster 7000-D Operator's Manual page 87

Maintenance
Service Interval
Every 800 hours
Every 1,000 hours
Every 2,000 hours
Every 6,000 hours
Before storage
Every 2 years
3466-702A
Maintenance Procedure
Drain and clean the fuel tank.
Change the front planetary-gear
oil, or yearly, whichever comes
first.
Change the oil in the rear axle.
Check the rear-wheel alignment.
If you are not using the
recommended hydraulic fluid or
have ever filled the reservoir
with an alternative fluid,
the hydraulic filters.
If you are not using the
recommended hydraulic fluid or
have ever filled the reservoir
with an alternative fluid,
the hydraulic fluid.
If you are not using the
recommended hydraulic fluid,
replace the hydraulic filters.
If you are using the
recommended hydraulic fluid,
change the hydraulic fluid.
Disassemble, clean, and
assemble the soot filter of the
DPF (and when engine faults
SPN 3251 FMI 0, SPN 3720 FMI
0, or SPN 3720 FMI 16 shown
on the InfoCenter).
Drain and clean the fuel tank.
Flush and replace the cooling
system fluid (take the machine
to an Authorized Service Dealer
or Distributor or refer to the
Service Manual).
Part No.
121-6393
121-6392
121-6395
121-6394
-
-
-
-
75-1310
replace 94-2621
133-8086
change
133-8087
75-1310
94-2621
133-8086
133-8087
-
-
-
Page 6–3
Qty Description
10W-30 Premium Engine Oil (5
1
gallons)
10W-30 Premium Engine Oil (55
1
gallons)
15W-40 Premium Engine Oil (5
1
gallons)
15W-40 Premium Engine Oil (55
1
gallons)
- -
- -
- -
- -
Hydraulic filter
1
Hydraulic filter
1
PX Extended Life Hydraulic Fluid
1
(5 gallons)
PX Extended Life Hydraulic Fluid
1
(5 gallons)
Hydraulic filter
1
Hydraulic filter
1
PX Extended Life Hydraulic Fluid
1
(5 gallons)
PX Extended Life Hydraulic Fluid
1
(55 gallons)
- -
- -
- -
Maintenance: Recommended Maintenance Schedule