FusionModule2000 Smart Modular Data Center
Maintenance Guide
Step 3 Remove the charging cable from the failed pad.
Step 4 Remove the failed pad from the support and install the reserved pad on the support.
Step 5 Connect the charging cable to the reserved pad.
----End
6.4.17 Replacing a Pad Power Connector
Context
Name
Pad power connector
Pad power connector
Pad power connector holder
Impact on the System
The pad cannot be charged.
Preparations
Procedure
Step 1 Switch off the upstream power circuit breaker of the pad power connector.
Step 2 Remove the baffle plate under the power connector.
Step 3 Remove the charging cable from the power connector.
Step 4 Remove the pad power connector and its holder from the door box.
Issue 05 (2020-03-25)
Tool: Phillips screwdriver
Materials: pad power connector, pad power connector holder
Copyright © Huawei Technologies Co., Ltd.
Exterior
6 Parts Replacement
Description
The BOM number is
14190892.
The BOM number is
14190242.
Obtain it from the aisle door
accessories.
99