Table of Contents
Advertisement
FusionModule2000 Smart Modular Data Center
Maintenance Guide
WAN ports support the Internet access and LAN ports support the intranet access. Connect
the PC network port to the WAN port or LAN port on the ECC800 based on the access
network.
Step 2 Configure the PC IP address and the WAN_1 IP address in the same network segment.
If the port IP address is 192.168.1.10, subnet mask is 255.255.255.0, and default gateway is
192.168.1.1, set the PC IP address to 192.168.1.11, subnet mask to 255.255.255.0, and default
gateway to 192.168.1.1.
Step 3 Set LAN parameters.
1.
2.
3.
4.
5.
Issue 05 (2020-03-25)
If the ECC800 connects to a LAN and a proxy server has been selected, perform
3.4.
If the ECC800 connects to the Internet, and the PC in a LAN accesses the Internet over a proxy
server, do not perform
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
(Optional) Click the Connections tab and select LAN settings.
(Optional) On Proxy server, clear Use a proxy server for your LAN.
Click OK.
Figure 6-1 Setting internet options
Copyright © Huawei Technologies Co., Ltd.
Step 3.3
and
Step
3.4. Otherwise, you will fail to access the ECC800.
6 Parts Replacement
Step 3.3
and
Step
45
Advertisement
Table of Contents
