Huawei V500R003C00 Maintenance Manual page 40

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Item
Check the
availability of
the skylight
actuator.
Check the
availability of
the magnetic
lock.
Check the
availability of
the access
actuator.
Check the
availability of
the access
control system.
Issue 05 (2020-03-25)
Operation
and remotely
control the
lights.
NOTE
After checking the
AC actuator, set Set
light mode to the
status before you
perform 1.
On the ECC800
WebUI, choose
Monitoring >
Aisle > Skylight
Actuator Group >
Skylight Actuator
to enter the Controls
page, and remotely
control the skylight.
NOTE
If you open the
skylight remotely for
maintenance,
manually close the
skylight after the
maintenance is
complete.
On the ECC800
WebUI, choose
Monitoring >
Aisle > Access
Actuator Group >
Access Actuator to
enter the Controls
page, and remotely
control the doors.
Open the door by
pushing the exit
button.
Open the door by
pushing the
emergency button.
NOTE
The emergency
button needs to be
pressed twice. One
press will open the
Copyright © Huawei Technologies Co., Ltd.
Standard
The skylight in the
smart module aisle can
be normally controlled
through the skylight
actuator.
The smart module
aisle doors can be
normally controlled
through the access
actuator.
The door opens
normally after you
push the exit button.
The door opens
normally after you
push the emergency
button.
4 Routine Maintenance
Troubleshooting
If the skylight cannot be
normally controlled,
check whether the cable
between the skylight
magnetic lock and
actuator is in good
condition and securely
connected. If not,
replace the skylight
magnetic lock or
actuator.
If the smart module aisle
doors cannot be
normally controlled,
check whether the
magnetic lock cable is
loose or disconnected. If
so, reconnect the cable.
If not, replace the access
actuator or magnetic
lock.
If the other devices in
the access control
system are working
properly and the door
cannot be opened by
pushing the exit button,
replace the exit button.
If the other devices in
the access control
system are working
properly and the door
cannot be opened by
pushing the emergency
button, replace the
emergency button.
33