Table of Contents
Advertisement
FusionModule2000 Smart Modular Data Center
Maintenance Guide
An LED light has male and female connectors at both ends for interconnection.
Figure 6-62 Interconnecting LED light tubes
Procedure
Step 1 Locate a failed light.
Step 2 Replace the LED light.
1.
2.
Issue 05 (2020-03-25)
If an LED light does not work but the cables to the light are intact, the LED has failed and the LED
light needs to be replaced.
If all LED lights after a light do not work, the LED light adjacent to the working LED light has
failed.
Remove LED light tubes in the aisle one by one from the side not connected to the
power supply until the failed LED light is removed.
Replace the failed LED light with a new one, and reinstall the removed LED lights one
by one.
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
105
Advertisement
Table of Contents
