Engine Maintenance; Engine Safety; Servicing The Air Cleaner - Toro 03781TE Operator's Manual

•
Cutting unit carrier frame (2 per cutting unit)
(Figure 45)
•
Cutting unit lift arm pivot (1 per cutting unit)
45)
Figure 45

Engine Maintenance

(Figure

Engine Safety

•
Shut off the engine before checking the oil or
adding oil to the crankcase.
•
Do not change the governor speed or overspeed
the engine.

Servicing the Air Cleaner

Service Interval: Every 400 hours—Service the air
Check the air-cleaner body for damage which could
cause an air leak. Replace it if it is damaged. Check
the whole intake system for leaks, damage, or loose
hose clamps.
g015158
Service the air-cleaner filter only when the service
indicator (Figure
before it is necessary only increases the chance of
dirt entering the engine when the filter is removed.
1. Service indicator
Important:
correctly and seals with the air-cleaner body.
1. Park the machine on a level surface, lower the
cutting units, engage the parking brake, shut off
the engine, and remove the key.
2. Pull the latch outward and rotate the air-cleaner
cover counterclockwise
41
cleaner. Service the air cleaner
earlier if the service indicator shows
red. Service it more frequently in
extremely dirty or dusty conditions.
46) requires it. Changing the air filter
Figure 46
Be sure that the cover is seated
(Figure
g009709
47).